PDA

View Full Version : a50 NEW VERSION 8

The Dog
14-07-2003, 14:35
Seems there is a new version 8 A50 out. old unlocker wont do it. Just thought I would bring you bad news! :sad:
fonefingz
14-07-2003, 14:36
just flash downgrade the phone
The Dog
14-07-2003, 14:38
nut didnt change the version! Heard A50 C55 by vilani might do it will let you all know!:rolleyes:
The Dog
14-07-2003, 14:40
using KSIE so there!;) :)
fonefingz
14-07-2003, 14:43
can u mail me the software u used?

sales@fonefingz.com

thanksmate
The Dog
14-07-2003, 14:46
hasnt unlocked it after all! Read everything and said ok!(DAMM)You still want it? I will keep trying!! By the way you unlocked any C55s yet? If so where are the test points and what is the best software please?
RudeYute
14-07-2003, 14:59
Ksie will do it, but you will still need to use test point.
The Dog
14-07-2003, 19:37
Tried it on direct unlock says OK but is still locked. Then tried to make a log which it did. Then tried to creat a map using this log and it says CreateIMEI Specific Blocks:it's not that release!!

:confused:

Here

COMM_LoadBoots : phone is powered on
COMM_LoadBoots : internal loader version is 00.02
COMM_LoadBoots : original IMEI is 35125600146136
COMM_LoadBoots : flash IMEI is 35125600146136 (locked)
COMM_LoadBoots : found SIEMENS A50 lg1 v8 (1)
COMM_LoadBoots : flash ids are 002088BA [00000000] - BA20
COMM_LoadBoots : phone ids are F8D763C4 [F8D763C4]
SEC_CreateIMEISpecificBlocks : it's not that release
The Dog
14-07-2003, 22:32
using KSIE_2 from an FLS file of a version 4 Siemens A50. It took over an hour an is 16mb! Now I am trying to write this into the version 8 so I can unlock it but it is just not having it.

COMM_NormalWriteFlashBlock : writing block
COMM_NormalWriteFlashBlock : checksum error at 00C00000, retrying
COMM_NormalWriteFlashBlock : sending block
COMM_NormalWriteFlashBlock : erasing block
COMM_NormalWriteFlashBlock : writing block
COMM_NormalWriteFlashBlock : checksum error at 00C00000, retrying
COMM_NormalWriteFlashBlock : sending block
COMM_NormalWriteFlashBlock : erasing block
COMM_NormalWriteFlashBlock : writing block
COMM_NormalWriteFlashBlock : checksum error at 00C00000, retrying
COMM_NormalWriteFlashBlock : sending block
COMM_NormalWriteFlashBlock : erasing block
COMM_NormalWriteFlashBlock : writing block
COMM_NormalWriteFlashBlock : checksum error at 00C00000, retrying
COMM_NormalWriteFlashBlock : write error at 00C00000

is what is happening when I try to write it to the phone. Please any suggestions? The start address is 0XC00000 - 0XFFFFFF

:confused: :rolleyes:
The Dog
14-07-2003, 23:22
Just tried a winswup flash to version 4. Can not ping mobile or no bootloader. **** it Ive had enough for tonight!(Im only unlocking it for a favour for a friend):sad: :mad:
Flexasist
17-07-2003, 18:33
type *#0000*xxxxxxxx#

xxxxxxxx = unlock code

buy a log and get the code :)
The Dog
17-07-2003, 18:40
I have unlocked it without a log
spectrum
18-07-2003, 16:09
Just wondering..... ,
You can also use the softy from spunlock
The Dog
18-07-2003, 16:49
Can yuou e-mail it to me please?
spectrum
18-07-2003, 16:58
You can find it at http://www.spunlock.com/
Thx
The Dog
18-07-2003, 17:53
Why didnt I think of that :rolleyes: :bigup:
spectrum
18-07-2003, 18:16
No prob m8.
You always help without even thinking about it.
seles
29-07-2003, 21:37
how about a50 tool by jordik 7.5 ? upto ver 10 ok? :cool:
Tim Rob
29-07-2003, 21:40
Jordik version 7.5 (http://www.phantom2k3.pwp.blueyonder.co.uk/Software/Siemens/a50_tool_by_jordik7.5.zip) :)
The Dog
30-07-2003, 11:29
you have to make a dongle for using an LPT cable?
Tim Rob
30-07-2003, 11:31
Not for the 7.5 version. It's cracked to work without dongle m8:)
spectrum
30-07-2003, 11:47
7.5 was cracked by XAK - No dongles needed
seles
30-07-2003, 20:06
how do i use it do i need to test points?
The Dog
30-07-2003, 20:13
unless this is miracle software! Check previous posts (about one month back) for photos of testpoint and how to do it! It is very east for this model. CHEERS!:)
Tim Rob
30-07-2003, 20:21
See here (http://www.crazynokia.co.uk/showthread.php?s=&threadid=10046) :)